TH160 Maximum Thermal Protection

For maximum thermal protection, choose the Raynor TH160, durable, energy-efficient sectional door. Raynor’s exclusive process fills 100% of the commercial door’s interior space with energy-saving polyurethane foam insulation to deliver an exceptional 14.86 R-value. This process also provides a superior foam density for excellent structural integrity. With standard features like the corrosive resistant rigid aluminum retainer and the EPDM rubber floor seal, the TH160 is built to last!

TH160 Features and Options

Raynor TH160 commercial doors are available with numerous features and options, including those listed below.

Maximum Thermal Protection

Energy-saving polyurethane foam insulation is used to deliver exceptional R-values.

Rugged Hardware and Springs

Your ThermaSeal door comes packaged with the right combination of long-lasting hardware, track, and springs to precisely match your door’s size and application.

Reduced Airflow

Dual vinyl barriers dramatically reduce air infiltration. A true thermal break prevents heat loss and eliminates any metal-to-metal contact between surfaces.

Decreased Energy Costs

ThermaSeal doors help you reduce energy costs with a U-shaped, vinyl bottom weatherseal and sturdy aluminum retainer.

Raynor TH160 commercial doors are available in White.

Type Commercial Sectional Garage Doors
Model TH160
Size 24′ x 22′ Max
Operation Manual, Motor or Hand Chain
Construction 3-Layer Sandwich
Material Steel
Surface Texture Stucco Exterior; Stucco Interior
Section Joint Ship Lap
Section Thickness 1-5/8″
Gauge Exterior Steel Thickness 0.015″
Stiles 16-Gauge
Insulation Polyurethane (R-value 14.86)
Seals Thermal Break, Bottom Seal (3″)
Trussing Wind Load: 20 P.S.F. Tested/13.3 P.S.F. Design Load (standard); Material: U-bar 4″, 6″, or 8″ sizes
Panel Configuration NA
Color White
Windows 24″x12″ two-piece acrylic, clear insulated glass, clear insulated tempered
Type Normal Headroom, Rear Mount Low Headroom, Front Mount Low Headroom, Lift Clearance, Vertical Lift, Incline, Contour
Finish Galvanized
Size 2″ or 3″
Gauge 12, 13, 16-Gauge
Counterbalance System
Type Torsion Spring, Tandem Shaft Torsion Spring, or Weight Counterbalance
Springs Spring Inner Diameter: 2-1/4″, 3-1/2″ or 5-1/2″; Duplex or High Cycle (30K, 50K, 100K)
Shafts Tube (13-Gauge) or Solid (D-Shaft, 1″ Keyed, 1-1/4″ Keyed)
Hinges 11, 13, 14-Gauge or Hybrid
Rollers Standard (2″ or 3″) or Heavy Duty (2″ or 3″)
Finish Galvanized
Lock Interior Slide Lock
Seal(s) Header Seal or Jamb Seal
Hanger Angle 11, 13, 16-Gauge

Section and Panel Schedules

 Garage Door Width  Number of Raised Panels  Garage Door Height  Number of Sections
5′ 3″ – 9′ 2″ 2 Up to 8′ 2″ 4
9′ 3″ – 12′ 2″ 3 8′ 3″ – 10′ 2″ 5
12′ 3″ – 16′ 2″ 4 10′ 3″ – 12′ 2″ 6
16′ 3″ – 20′ 2″ 5 12′ 3″ – 14′ 2″ 7
24′ 3″ – 28′ 2″ 7 16′ 3″ – 18′ 2″ 9
20′ 3″ – 24′ 2″ 6 14′ 3″ – 16′ 2″ 8
18′ 3″ – 20′ 2″ 10

TH160 Warranty

Door Sections
Raynor warrants the door sections against defects in material and workmanship, and deterioration due to rust-through for ten (10) years from date of delivery to the original purchaser. Raynor also warrants the door sections against delamination of the polyurethane foam insulation from the steel skins for ten (10) years from date of delivery to the original purchaser. Window components are warranted against defects in material and workmanship for one (1) year from date of delivery to the original purchaser.

Hardware & Spring Components
Raynor warrants all hardware and spring components against defects in material and workmanship for one (1) year.


Under the terms of this limited warranty, for any door components that are found to be defective upon inspection by authorized Raynor personnel, Raynor will, at its option, repair or replace the defective door components. Labor charges for the installation or repairs shall be the responsibility of the consumer and must be performed by a qualified installer.This warranty applies only to doors that are professionally installed by a qualified installer.

This warranty extends only to the original purchaser, provided the door is installed in his/her place of business. This warranty is not transferable.

This warranty does not apply to any damage or deterioration to the door caused by abuse, negligence, missing components, accidents, use of pressure washers, dents or scratches. Shavings from trolley rails not properly removed and cleaned from the exterior door surface causing rust are not covered by this warranty. Failure to provide proper maintenance voids this warranty. Field applied paint failure is not covered by this warranty. Refer to the Care and Maintenance Instructions and Painting Instructions.

This warranty does not apply to damage caused by fire, an act of God, accident, vandalism or graffiti. Damage or deterioration caused by saltwater coastal areas (within two miles), hazardous or corrosive chemicals and fumes including, but not limited to, alkaline, acids, muriatic acids, road salt or salt environments, harsh cleaning agents, and fertilizers is not covered by this warranty.

Raynor shall not be liable for any consequential or incidental damages.


Some states do not allow the exclusion or limitation of consequential or incidental damages, so the above limitation or exclusion may not apply to you.

Claims for defects in material and workmanship covered by this warranty shall be made in writing with proof of purchase and photographs of the product in question to the dealer from whom the product was purchased or call Raynor at 1-800-4-RAYNOR within the warranty period. Raynor may choose to have the product returned for inspection.

This warranty gives you specific legal rights. You may also have other rights, which may vary from state to state.