FabriCoil™ Traffic Doors

With many of the desired features of typical commercial high-speed doors, Raynor FabriCoil traffic doors offer excellent durability and reliability at an affordable price. Our tough vinyl curtain is designed for interior applications, ideal for high traffic areas.

FabriCoil™ Features and Options

Raynor FabriCoil™ commercial traffic doors are available with numerous features and options, including those listed below.

Exceptional Construction

Painted, structural steel angle guides provide superior protection from side impact. Optional hood is roll-formed from hot-dipped galvanized steel for a finished look.

Increased Rigidity

Resilient aluminum wind beams decrease fabric deflection in windy and negative pressure conditions. Additional wind beams can be specified for higher negative pressure environments.

E-Z Reset

FabriCoil can be easily reset back into the guides, which means less downtime for employees and no costly service calls for replacement or repair.

Wireless Reversing Edge

If contact is made with the yellow reversing edge, FabriCoil will automatically return to the up position. The connection of the edge to the operator is wireless and no callbacks to broken coil cords or cable reels.

Vision Panel

The FabriCoil traffic doors vision panel provides visibility, ideal in high traffic environments.

Curtain Hood

FabriCoil’s optional hood is roll-formed from hot-dipped galvanized steel for a finished look.
Door
Type Commercial Traffic Door
Model FabriCoil BASIC
Mount Interior
Size 12′ x 14′ Maximum
Operation Motor Drive or Hand Chain
Drive Left or Right Hand
Curtain
Material 1-Ply PVC Fabric for Interior Use
Wind Load Not for High Negative Pressure Installations
Wind Beam Aluminum Extrusion Enclosed in Curtain Pocket Every 4′
Breakaway Tabs Min. 1/4″ UHMW
Bottom Bar Min. 2″ x 2″ x 3/16″ Hot Rolled; Steel Angles; Finish: Black Primer (Standard)ArmorBrite Powder Coated or Galvanized (Optional)
Vision Panels Clear PVC 24″ High with Curtain Fabric Reinforcement
Color Orange or Blue (Polyurethane-Orange Only)
Guides
Mounting Face (E or Z) or Jamb
Guide Construction Hot-Rolled Steel Angle
Jamb Construction Steel, Wood, Masonry or Non-masonry
Color/Finish Black, Galvanized or ArmorBrite Powder Coated
Counterbalance System
Type Hand Chain: Torsion Spring System; Motor: N/A
Headplates Thickness: 3/16″
Barrel 4″ with 8″ Rings and 24-Gauge Fascia
Bearing Plug Assembly Hand Chain: Removable on Drive End; Motor: Fixed, Welded Assembly
Enclosures
Hood Type: Round or Square (Optional); Material: Steel (24 ga.)
Fascia Material: Steel (24 ga.) (Optional or As Required by Mount Type)
Headplate Cover Steel (24 ga.) (Optional)
Motor Cover Material: Steel (24 ga.) (Optional); Mount Type: Bracket Mount; Access Doors Available
Color/Finish Standard: Gray; Optional Tan, ArmorBrite Powder Coated or Galvanized
Locks
Interior Dual Slide Bolts (Optional)
Exterior Dual Slide Bolts (Optional)
Interior/Exterior Dual Slide Bolts (Optional)
Weather Seal
Bottom Astragal Looped Rubber Astragal Provided; Motor Operation: Optional Yellow Wireless Electric Reversing Edge
Guide Brush Seal 2″ Brush with Aluminum Retainer (Optional)
Header Brush Seal 1-3/4″ Brush with Aluminum Retainer (Optional)
Mounting Hardware
Masonry Anchors 3/8″ or 1/2″ 4-Way Expansion Shields (Optional)
Thru Studs 3/8″ x 14″ or 1/2″ x 14″ Long Continuous Threaded Rod (Optional)
Crush Plates 4″ x 4″ x 8-Gauge (Optional)
Motor Drive
Type Continuous Duty; Door Speed: 17″ Per Second with Hand Chain Hoist
Drive Mounting In Front of Barrel
Rating 1 HP
Power 115V or 230V, 1 Ph., 230V or 460V, 3Ph., 60Hz
Control Wiring 24VDC Circuit
Control Station Provided with NEMA 1 Rated 3-Button Up/Down/Stop Functions
Accessories Safety Motor Interlock for Slide Bolt Locks (Optional); Radio Controls, Other Hard Wired Controls (Optional)
Warranty
Parts 1-Year Materials and Workmanship

FabriCoil Warranty

Raynor warrants the traffic door and its component parts for one (1) year against defects in material and workmanship.

Hardware & Spring Components
Raynor warrants all hardware and spring components against defects in material and workmanship for one (1) year.

Under the terms of this limited warranty, for any door components that are found to be defective upon inspection by authorized Raynor personnel, Raynor will, at its option, repair or replace the defective door components. Labor charges for installations or repairs shall be the responsibility of the consumer and must be performed by a qualified installer. This warranty applies only to doors that are professionally installed by a qualified installer.

This warranty extends only to the original purchaser. This warranty is not transferable.

This warranty does not apply to any damage or deterioration caused by abuse, applied paint failure or failure to provide reasonable and necessary maintenance.

Raynor shall not be liable for any consequential or incidental damages.

ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY, ARE HEREBY EXPRESSLY EXCLUDED.

Some states do not allow the exclusion or limitation of consequential or incidental damages, so the above limitation or exclusion may not apply to you.

Claims for defects in material and workmanship covered by this warranty shall be made in writing with proof of purchase to the dealer from whom the product was purchased or call Raynor at 1-800-4-RAYNOR within the warranty period. Raynor may choose to have the product returned for inspection.

This warranty gives you specific legal rights. You may also have other rights, which may vary from state to state.