H-325S_Teaser_1400x513

H-325S/H-324S

H-325S and H-324S doors are available in two choices of material: 25 gauge (0.19” min) or 24 gauge (0.22” min) with an R-value of 8.9., 3-layer bonded construction with a hot-dipped galvanized, finished steel front and back enclosing a HCFC-free polystyrene core. No matter which door suits your needs best, all H-325S and H-324S doors are manufactured to the highest quality standards and come with FingerGuard™ pinch-resistant section joints as standard.

10Yr_Warranty_Logo_Content_700x360px

Energy-efficient polystyrene core 

The H-325S & H-324S series of doors offers enhanced energy efficiency and sound-dampening qualities. The polystyrene insulation fills the top of the door channel for maximum insulation. With 2” thick sections, both series gives you an R value of 8.9.

H-225P_Vinylback_Content_360x360px

H-325S_Hinges_Content_700x360px

Engineering Excellence

Unique precision hinges with solid pivoting shaft to minimize wear on moving parts to provide long service life. All center hinges utilize a steel reinforcing backer plate for added structural integrity. Deep tongue and groove section profile adds to the door’s overall structural integrity and its longterm performance.

Commercial_Coating_Content_700x360px

Durability

H-325S and H-324S door panels are prepared inside and out to offer maximum protection against the adverse effects of the elements to provide you with a long-lasting surface finish and reduced maintenance cost. First, hot-dipped galvanizing is applied to the steel substrate, followed by a baked-on polyester base coat and a durable baked-on polyester finish coat. We use this steel finish on both, the inside and outside door skins which are bonded to the HCFC-free polystyrene core.

Commercial_Seals_Content_700x360px

Against Elements

A commercial grade material was carefully selected to maximize protection from outside elements. The between section seal is constructed of a special heavy duty material that acts as a gasket between section seams to reduce the air infiltration while further enhancing the insulation properties of a door.

Commercial_Pinch_Resistant_Content_700x360px

Safety

The uniquely designed FingerGuard™ pinch-resistant section joints prevent fingers from getting caught between the door sections. This increases the safety of your facility and reduces the risk of injuries which may result in worker’s compensation claims.

Deep tongue and groove section joint contribute to the door’s excellent strength. Intermediate seals prevent air infiltration, which enhances the insulation properties.

The steel front and back 3-layer sandwich construction with insulating polystyrene core increases energy savings and provides a very smooth and quiet door operation.

Galvanized finished painted steel provides superior corrosion resistance for years of trouble-free performance

The bottom weather seal keeps out wind, rain, debris and other elements for added energy savings

H-325S_Cutaway_Content_360x360px

Series

H-325S

H-324S

Steel Thickness

25 ga.

24 ga.

Section Thickness

2 in.

2 in.

R-Value

8.9

8.9

Polystyrene Core Insulation

Standard

Standard

Panel Designs

Microgroove

Standard

Standard

Flush

Standard

Standard

Traditional Raised Panel

Standard

Standard

External Textures

Microgroove

Stucco

Stucco

Flush

Stucco

Stucco

Raised Panel

Woodgrain

Woodgrain

Available Colors

White

Standard

Standard

Sandstone

Standard

Standard

Brown

Standard

Standard

Industrial Grey

Standard

N/A

Window Options

24″ X 6″

Optional

Optional

24″ X 12″

Optional

Optional

34″ X 16″

Optional

Optional

Opti-View

Optional

Optional

Warranty

Sections

10 years

10 years

Hardware

1 year

1 year

Commercial_Panel_Microgroove_Content_700x557px

Microgroove

Commercial_Panel_Flush_Content_700x557px

Flush

Commercial_Panel_Raised_Content_700x557px

Raised Panel

Commercial_Window_Small_Content_700x140px

Window 24″ X 6″

Commercial_Window_Medium_Content_700x140px

Window 24″ X12″

Single pane is standard for non-insulated doors. Insulated glass is standard for both vinyl back insulated and sandwich doors. The number of windows available per section depends on the door width.

Commercial_Window_Large_Content_700x140px

Window 34″ X16″

Single pane is standard for non-insulated doors. Insulated glass is standard for both vinyl back insulated and sandwich doors. The number of windows available per section depends on the door width.

Commercial_Window_Optiview_Content_700x97px

Opti-View Windows

Hörmann Opti-View is the optimum choice for commercial applications where maximum light and visibility is required. The Opti-View window design offers the similar features as other full view window designs. Clear single pane tempered glass is standard for both insulated and non-insulated doors. The number of windows available per section depends on the door width.

Commercial_Texture_Stucco_Content_700x360px

Stucco (Microgroove & Flush)

Commercial_Texture_Woodgrain_Content_700x360px

Woodgrain (Raised Panel)

Regardless of the color you choose, all of our surface finishes provide a durable baked-on polyester finish coat offering a long-lasting, attractive appeal.

Commercial_Texture_Stucco_Content_700x360px

White

Commercial_Color_Sandstone_Content_700x360px

Sandstone

Brown

Commercial_Color_Grey_Content_700x360px

Industrial Grey* (optional)

*Not available for H-324S Series